3ft. Polished Speed Rail (2pk)

Description

Custom cut, centerless ground, polished and anodized speedrail for the ultimate in smooth gliding motion. Although our Galaxy Line of camera support dollies will work well with any standard speedrail (that is one of the major perks of the system), we decided to offer a customized version that vastly improves upon generic varieties. Our 1¼” (1.660″ OD) schedule 40 aluminum speed rail pairs come in 3′, 4′, or 5′ sections.

Video

Technical Specifications

The Constellation is the largest offering in the MYT Works Galaxy Line. With a 14” footprint, ultra-high load capacity, Hi-Hat compatibility, and the ability to mount the plate on 19 mm rods or speedrail with adapters.

SPRING-LOADED WHEEL MODULE

Traditional skateboard dollies use wheels that merely rest upon the rails. Our MYT Skater Dollies’ unique spring-loaded wheel modules grip the rails. This provides the smoothest motion possible adjusting for any inconsistencies in the rails all the while keeping your camera setup secure.

Further, we include a brake SRP Locking Bolt with every set of modules to prevent run-away situations and keep your gear safe.

MOUNTING OPTIONS GALORE

More 1/4"-20, 3/8"-16, and 1/2"-13 threads than you can actually count. With holes for sash-cord and through-hole 3/8" slots for compatibility with other equipment, the Constellation doubles as one of the most sophisticated rigging plates out there.

Choose between 75 and 100 mm Doughnuts, Flat Mount, and Mitchell Mount options for use with any camera head.

HI-HAT LATCH RELEASE

Already own a Glide? Like the 3-in-1? Now try 4-in-1. The Constellation comes equipped with a quick release latch for Medium/Large Hi-Hat compatibility. But the similarities don't end there— many of our accessories for the Glide Line also work for the Galaxy Line!

The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75mm, 100 mm, 150mm, Mitchell, or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Industry Standard Speed Rail

Each of our Galaxy Line Skater Dollies runs on standard 1-1/4" aluminum pipe (1.660" outside diameter). Need to travel light? Purchase rail from a local hardware store or rental house at your destination.

Increase the length of travel by linking rail sections via our Speed Rail Connectors. Then simply place Middle Truss Supports as needed.

ALUMINUM END TRUSS

Mount Baby Feet directly to the underside of the Trusses at a 15-degree angle or mount a 5/8” light stand, c-stand, or baby pin to the receiver directly. Utilize a Truss-to-Tripod Adapter and place the system on a tripod of your choice.

We take great pride in the workmanship and quality of each one of our systems. All of our products are built to last and the Glide is no exception. Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work. We're also proud to be Made in America. All of our custom components are designed, machined, and assembled in the New York City and Tri-State area.

 

 

The Level 5 is the medium sized offering in the MYT Works Galaxy Line. With a 10” footprint, high load capacity, Hi-Hat compatibility, the the ability to mount the on 19 mm rods and speedrail.

SPRING-LOADED WHEEL MODULE

Traditional skateboard dollies use wheels that merely rest upon the rails. Our MYT Skater Dollies’ unique spring-loaded wheel modules grip the rails. This provides the smoothest motion possible adjusting for any inconsistencies in the rails all the while keeping your camera setup secure.

Further, we include a brake SRP Locking Bolt with every set of modules to prevent run-away situations and keep your gear safe.

MOUNTING OPTIONS GALORE

More 1/4"-20, 3/8"-16, and 1/2"-13 threads than you can actually count. With holes for sash-cord and through-hole 3/8" slots for compatibility with other equipment, the Constellation doubles as one of the most sophisticated rigging plates out there.

Choose between 75 and 100 mm Doughnuts, Flat Mount, and Mitchell Mount options for use with any camera head.

Level 5 Mounting Points
Level Hi-Hat Compatibility

HI-HAT COMPATIBILITY

Already own a Glide? Like the 3-in-1? Now try 4-in-1. The Level 5 supports both Small and Medium/Large Hi-Hats. Mount the Hi-Hat directly via SRP Locking Bolts or our quick release Duplex accessory. But the similarities don't end there— many of our accessories for the Glide Line also work for the Galaxy Line!

The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75 mm, 100 mm, 150 mm, Mitchell, or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Industry Standard Speed Rail

Each of our Galaxy Line Skater Dollies runs on standard 1-1/4" aluminum pipe (1.660" outside diameter). Need to travel light? Purchase rail from a local hardware store or rental house at your destination.

Increase the length of travel by linking rail sections via our Speed Rail Connectors. Then simply place Middle Truss Supports as needed.

Industry Standard Speed Rail

Level 5 End Support Truss

ALUMINUM END TRUSS

Mount Baby Feet directly to the underside of the Trusses at a 15-degree angle or mount a 5/8” light stand, c-stand, or baby pin to the receiver directly. Utilize a Truss-to-Tripod Adapter and place the system on a tripod of your choice.

We take great pride in the workmanship and quality of each one of our systems. All of our products are built to last and the Glide is no exception. Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work. We're also proud to be Made in America. All of our custom components are designed, machined, and assembled in the New York City and Tri-State area.

Configuration

$195.00